To maximise performance you need to ensure you need that as much cold air as possible is fed into the engine. The enclosed carbon air filter cylinder kit does just that.

This new sealed induction system improves air flows and air density which increase the volume of air drawn into the cylinders. The ECU then increase the fuel flow rate to maintain the air fuel ratio, which then produces greater combustion in the cylinders thus giving more power.

We recommend that you ensure there is enough space in the engine bay to fit this kit.

We provide a strong fixing bracket so that the carbon cylinder can be positioned securely.

A 1m length of cold air ducting is supplied with out kit. The ducting can be cut to the required length and then should be positioned down at the front of the engine bay with the cold air funnel attached to one end . Attached the other end of the ducting to the front end of the carbon cylinder. This will ensure that as much cold air as possible is channelled into the sealed chamber. The carbon cylinder minimizes heat soak therefore maximizing the cool air effect entering the engine combustion chamber. the rear of the carbon cylinder should be attached to you vehicle's throttle body, ait inlet or airflow metre which ever part your vehicle is equipped with

If you cannot achieve a satisfactory fit to your vehicle's inlet mounting/throttle body we have a comprehensive range of fittings including rubber/silicon tubing, reducers, connectors, airflow metre adaptors and various chrome tubing.